CycloTech Prostop Hydraulic Brake Cable Ø2.3mm 30m - Black

This 30-meter roll of Cyclotech Prostop hydraulic brake hose is designed for workshop assembly of replacement brake lines for compatible Shimano BH90, SRAM, and Formula systems using a 2.3 mm hose bore. The bulk roll allows you to cut each hose to the required length when replacing a line that is leaking, kinked, crushed, or damaged during component changes or internal frame routing. Compatibility depends on more than just hose diameter, so the correct brand- and model-specific insert, olive, compression nut, or banjo fitting must be used at each end. Cut the hose squarely with a hydraulic hose cutter, avoid contaminating the inner bore, and bleed the brake afterwards with the fluid specified by the brake manufacturer; mineral oil and DOT brake fluid must never be mixed.

- 30-meter workshop roll for assembling custom-length hydraulic brake hoses
- 2.3 mm hose bore for compatible braking systems
- Suitable for Shimano BH90, SRAM, and Formula applications with matching fittings
- Replacement for leaking, kinked, crushed, or incorrectly shortened brake hoses
- Supplied without confirmed olives, inserts, banjos, or compression fittings
- Requires a hydraulic hose cutter and full brake bleed after installation
- Aftermarket hose supplied as a bound roll

Specifications
Brand: Cyclotech
Model: Prostop
Type: Brake hose
Brake System: Hydraulic
Hose Bore Diameter: Ø2.3 mm
Shimano Hose Standard: BH90
Supplied Format: Bound workshop roll
Roll Length: 30 m
Quantity: 1 roll
Color: Black