Enviolo Heavy Duty Hub 135mm 32G Disc 6-Hole - Black

Color: Matt black
Weight: 2450g
Max. Speed (RPM): 800RPM
Nominal ratio range 380% (0.5 - 1.9)
Max. continous torque from the drive system: 100Nm*
Max. peak torque from the drive system: 100Nm*
Max. nominal power input from the drive system: 500W*
Max. gross vehicle weight (rider / cargo / bike): 250kg*
Lifetime: 20.000km
IP classification: Hub=IP65; Freewheel=IP54; Rear hub interface=IP54
Temperature range: -20°C to 48°C
Brake options: 6-bolt disc/rim
Max brake disc rotor: 203 mm
Disc brake screw length requirements: 10-17mm
Max disc brake screw torque: Use disc brake manufacturers recommendation but don´t exceed 6.2Nm
Spoke options: 32/36
Spoke size: 2mm - 2.34 mm
Spoke flange diameter: 125 mm
Spoke hole diameter: 2.9 mm
Wheel size: Minimum 16"

Axle threads:
M10*1
M12*1 tapered (Syntace)
M12*1 flat (DT Swiss)
M12*1.5 (E-Thru)
M12*1.75 (Maxle)

Dropout width: 135 or 148 mm
Dropout thickness: 6-10 mm
Dropout length for no-turn washer engagement (measured from axle center), recommended 14mm; Minimum 10mm
Total axle width (without acorn nuts): 183 mm

Chainline:
49.0 +/- 0.5mm for 135mm
52.2 +/- 0.5mm for 148mm

Beltline (Gates):
45.5 +/- 0.5mm for 135mm
48.7 +/- 0.5mm for 148mm

Sprocket thickness (chain): 2.3mm
Sprocket thickness (belt): 4.3mm
Sprocket sizes (chain): 16-22T
Sprocket sizes (belt) 20-28T
Sprocket type: 9-spline, one side flat
Chain type: 3/32", 1/8" with 3mm offset cog
Min. sprocket ratio (pedal bike): 1.8
Min. sprocket ratio (front motor): 1.8
Min. sprocket ratio (mid motor): 2.0
Min. sprocket ratio (Bosch Gen2): 0.80
Min. sprocket ratio (MPF): 1.55
Recommended lacing patterns: 2-cross for 26" or lager, 1-cross for 24" or smaller, radial spoking is not allowed