Motip Penetrating Oil 400Ml

Good penetrating effect
Contains graphite and MoS2
Moisturizing
Anti-corrosion
Targeted spray pattern
360° nozzle

Effective tool to loosen rusted part. Penetrating oil has good penetrating properties and contains graphite and MoS2. Penetrating oil is moisture repellent and rust preventive. MoTip Penetrating Oil has a powerful jetspray and can be used in various positions.

Penetrating oil is moisture-repellent and anti-corrosion.
MoTip penetrating oil has a targeted spray pattern and can be used at any angle

Applications: Hinges and locks, Tools, Screw connections, Guide rails, Sprockets, Chains, Locks, Garden tools, Fasteners (screws, bolts and nuts), reels

Physical and Chemical Properties:
Content: 400 ml
Base: Mineral oils with graphite and MoS2
VOC content: Approximately 70% w / w
Color: Graphite / black
Odor: Characteristic
Specific gravity at 20°C: 0.86 g / ml
Spray yield: 2.33 g / sec.
Vapor pressure at 20 ° C: 3 to 4 bar

Warning: hazardous substances

Signal word

Danger

Hazardous substances GHS, H-phrases

• H412 : Harmful to aquatic life with long-lasting effects.
• H222-H229 : Extremely flammable aerosol. Pressurised container: May burst if heated.

Hazardous substances GHS, P-phrases

• P102 : Keep out of reach of children.
• P210 : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211 : Do not spray on an open flame or other ignition source.
• P251 : Do not pierce or burn, even after use.
• P260 : Do not breathe spray.
• P501 : Dispose of contents/container in accordance with local regulations.
• P410+P412 : Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Additional hazard information (EUH-phrases)

• EUH066 : Repeated exposure may cause skin dryness or cracking.

Safety Data Sheet