Motip Teflon Ptfe Spray 400Ml

Universal lubricant with outstanding mechanical and thermal stability to treat mechanical parts of metal.
PTFE spray has a very low friction factor and excellent adhesion.
PTFE spray is resistant to weather influences and weak acids and bases.
MoTip Cycling PTFE Spray has a fine structure (particle size approximately 5 micrometer) and a directed jetspray.

Applications:
Chains, Sprockets, Derailleur front and rear, Shifter cable, Brake cable, Shift lever, Brake lever, Lock

Content: 400 ml
Base: Mineral Oils
VOC content: approx. 60%
Color: Transparent white
Odor: Characteristic
Density at 20°C: 0.88 g/ml
Syringe yield: 1.34 gr / sec.
Vapor pressure at 20 ° C: 3 to 4 bar
4 ball EP test (ASTM D 2596): 3430 N
4 Ball Wear test (ASTM D 2266) <0.4 mm
Temperature resistant: -50°C to + 250°C
pH value: Neutral

Warning: hazardous substances

Signal word

Danger

Hazardous substances GHS, H-phrases

• H412 : Harmful to aquatic life with long-lasting effects.
• H222-H229 : Extremely flammable aerosol. Pressurised container: May burst if heated.

Hazardous substances GHS, P-phrases

• P102 : Keep out of reach of children.
• P210 : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211 : Do not spray on an open flame or other ignition source.
• P251 : Do not pierce or burn, even after use.
• P260 : Do not breathe dust/fumes/gas/mist/vapours/spray.
• P501 : Dispose of contents/container in accordance with local regulations.
• P410+P412 : Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Additional hazard information (EUH-phrases)

• EUH066 : Repeated exposure may cause skin dryness or cracking.

Safety Data Sheet