Icetoolz Bearing Cup Remover Xpert

This IceToolz bottom bracket extractor is suitable for the following sizes: 24mm to 30mm.
With the Cr-Mo steel extractor it is very easy to correctly remove the headset cups and some sizes of bottom bracket.
The bottom bracket extractor works as follows: The striking side of the bottom bracket extractor is inserted through the bearing so that the 4 spring parts on the other side of the bottom bracket extractor are driven together and thus pass through the bearing, until the bottom bracket extractor is within the bracket is.
The four spring parts are now in the bracket and can be pressed back against the bearing.
The spring parts of the bottom bracket extruder now touch the outer shell of the bottom bracket.
Now you can carefully tap the striking side of the bottom bracket expeller with a (rubber) hammer until the bearing is out of the frame. (NB: be careful with carbon frames if the bearings are glued.)

Specifications:
Color: Silver
Material: Steel
Weight: 90 grams
Length: 16.5 cm
Suitable for internal diameters from 24 mm to 30 mm