Thomson Elite Seatpost Ø30 x 410mm Aluminum - Black

The Thomson Elite seatpost is the standard by which all other seatposts are judged.
Forged clamps, integrally machined head,
and an elliptically extruded 7000 series aluminum body have made the Elite,
The Setback Elite the industry models for strength and ease of adjustment.

The Thomson Elite seatpost is over 40% stronger on ultimate strength tests
than the strongest production seatposts on the market.
The Thomson Elite has double the durability of any other production models Thomson has tested.
The tube and head of the Thomson seatpost are integral-machined
from one piece of high strength 7000 series aluminum.
The head is not pressed or bonded in.
This allows superior strength and minimum weight.

Its incredibly lightweight—approximately 201 grams (based on a length of 250) for road bikes
and 228 grams (a length of 330 mm) for mountain bikes.
The natural ellipse drilled inside the tube, creates an optimum strength-to-weight ratio.

Thomson's products are equipped with a long 1.614 inch (41 mm) seat rail grip length.
This helps to prevent seat rail bending from impact loads.
Most other seatposts have grip lengths of at least .500 inches shorter than Thomsons grip length.
The Thomson seatpost's design incorporates a bending fuse, to prevent catastrophic failure.
All competitive seatposts Thomson tested failed catastrophically with the seat and clamp components,
and sometimes pieces of the tube and head flew off in all directions.

The Thomson seatpost has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque.
The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque.
Under severe impact, the Thomson seatpost will bend slightly and allows the rider to come to a safe halt or to finish the ride.

The Thomson seatpost has all parts captive
and can easily be attached to a seat without disassembly.
Infinite tilt adjustment minus 5° and plus 29°.
Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails.
The designs and materials have passed extensive life and ultimate strength tests.
Thomsons ongoing testing program ensures that every production lot of seatposts meets Thomson standards.

Impact absorbing clamps in the seatpost will spread and flex on impact, to protect seat, rails, and rider.
The seats survive heavy impact loads without bending the rails.

Features:
- Diameter: 30 mm
- Straight / Setback: Straight
- Length: 410 mm
- Color: Black